|
Pulley Hydra Triple Swivel
Rock Exotica Hydra Triple Swivel Pulley
The HYDRA is a triple attachment pulley which features a swivel-top connection to facilitate the pulley's use on the saddle bridge, and for use in climbing systems. Rubber o-rings line the connection points to assist in holding carabiners tightly to avoid dangerous cross-loading.
View Details
|
P4 |
Pulley Hydra Triple Swivel |
3 |
128.01 |
/ EA |
P4 |
|
|
Dmm Hitch Climber Pulley
DMM Hitch Climer Pulley
The DMM Triple Attachment Pulley (Hitch Climber Pulley) combines the high efficiency of our pulleys with a small three hole rigging plate to give an extremely versatile piece of equipment. It can obviously be used as a standard pulley, but the additional holes allow it to be guided or controlled without adding any complication into the system.
Features:
Certified to EN12278:2007 (Pulleys) and NFPA 1983 (2012 Edition) Class T rating
Triple attachment points for special applications
Hot forged aluminium side plates provide strength and durability Heat treated stainless steel spindles for high strength and corrosion resistance
Pre lubricated Oilite bushing for ultra smooth operation
Riveted and tamperproof assembly
Recommended for arborist and rescue applications
Anodised to BS EN 7599:2010 AA10 Sealed for corrosion protection
View Details
|
PUL100 |
Dmm Hitch Climber Pulley |
3 |
92.95 |
/ EA |
PUL700RD |
|
|
Dmm Pinto Pulley
DMM Pinto Pulley (Red / Small)
DMM Pinto Pulleys have a hot forged frame 7075 T6 aluminium for exceptional strength to weight ratio. The Pinto Red Pulley (small) carries an oilite bushing, while the Pinto Purple Rig (large) rigging pulley carries 6000-2RS series ball bearings.
Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. All sorts of wonderful configurations become possible. Fair-lead flares and rounded cheek plate edges that help maintain high working efficiency.
Specifications:
Rope Capacity: 1/2" (13mm) 50KN
Max rope diameter: <14 mm
Minimum breaking strength: 40 kN (9000 lbs.)
Working Load Limit: 8 kN (1800 lbs.)
Efficiency: 71%
MPN: PUL110
View Details
|
PUL110 |
Dmm Pinto Pulley |
2 |
55.95 |
/ EA |
PUL110 |
|
|
Pinto Rigging Pulley Purple
DMM Pinto Pulley (Purple / Large)
DMM Pinto Pulleys have a hot forged frame 7075 T6 aluminium for exceptional strength to weight ratio. The Pinto Red Pulley (small) carries an oilite bushing, while the Pinto Purple Rig (large) rigging pulley carries 6000-2RS series ball bearings.
Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. All sorts of wonderful configurations become possible. Fair-lead flares and rounded cheek plate edges that help maintain high working efficiency.
Specifications:
Max rope diameter 16 mm
Minimum breaking strength: 50 kN (11,000 lbs.)
Working Load Limit: 10 kN (2200 lbs.)
Efficiency: 95%
MPN: PUL120
View Details
|
PUL120 |
Pinto Rigging Pulley Purple |
1 |
83.95 |
/ EA |
PUL120 |
|
|
(m) Shizll Rope Slider
Shizll Rope Slider
The Shizll Rope Slider is developed to do what it should do: Move your friction hitch and transition your climbing line without extra weight or friction.
Features:
Easy to use
Made of one part, no moving parts
No additional friction when climbing a different angle than straight up or down
The Ropeslider is only 28 gram
Reduces twists at your line
View Details
|
R01 |
(m) Shizll Rope Slider |
Please Call for Availability |
39.99 |
/ EA |
R01 |
|
|
Rock Exotica Unicender
D22A Petzl Zig Zag Prusik
The ZIGZAG mechanical Prusik allows the user to move around efficiently in a tree using classic Prusik pulley system technique. The linked rings provide precision and fluidity when moving around. The pulley is mounted on sealed ball bearings to allow the slack to be taken up easily. The steel construction offers great durability.
Features:
Technique identical to classic Prusik pulley system.
Release lever mounted on spring for great precision when jamming/releasing the device. Varying the pressure on this lever controls the speed of the descent.
Friction links provide progressive braking action for fluidity when moving around.
Pulley mounted on sealed ball bearings to allow slack to be taken up easily.
Swivel always keeps the device in position for better rope glide through the device.
Steel construction for improved durability.
Upper connection point for easily connecting the directional on a double rope.
For DRT use only (double ropes).
View Details
|
RG50 |
Rock Exotica Unicender |
2 |
315.00 |
/ EA |
RG50 |
|
|
Isc Cast Pulley 5/8"
ISC 5/8" Cast Rigging Block Pulley
These rigging blocks from ISC combine the convenience of a spring loaded upper pin with a captive bushing, and a lightweight aluminum design. Simply push and twist the upper pin, and the cheekplates will swing open. Best of all, the bushing and pin can not fall out of the block. The sheave and bushing pins are stainless steel.
Specifications:
Material: Aluminum
WLL: 4,400 lbs
Working Line: 5/8"
Topping Strop: 1"
View Details
|
RP051A1 |
Isc Cast Pulley 5/8" |
4 |
236.95 |
/ EA |
RP051A1 |
|
|
Pulley Cmi Alum Micro Single
CMI Micro Pulley
CMI's RP110 micro pulley is used primarily used as a slack tender for your friction hitch on a traditional system or on your lanyard. The sideplates swing open to allow placement anywhere on the line. The aluminum cheeks plates designed to work with a carabiner has a 7/8" hole. A double lock nut hold everything together on an aluminum axle.
Specifications:
Color: Purple
MBS: 7,000 lbs
Rope capacity: 1/2
Size: 2.75" x 1.85"
Anodized Aluminum sideplates
1-1/4" Aluminum sheave bushing
Stainless Steel Axle
Weight: 0.15
View Details
|
RP110 |
Pulley Cmi Alum Micro Single |
4 |
49.95 |
/ EA |
RP110 |
|
|
Cmi Rp130 Stainless Block 5/8"
CMI 5/8" Stainless Block Pulley
CMI stainless steel blocks are a staple in the arborist community. Engineered to take on the most demanding rigging jobs, the block cheeks are made from high strength stainless steel to give you years of service. Aluminum alloy bushings and sheaves are supported by stainless steel axles. Upper bushing is easily accessed by a no-slip nob, and it is captive, so you won't loose it. Sheave is 3" in diameter and is supported by a sintered bronze bushing. Cheek plates are broad enough to protect lines during use and polished to a shine.
Specifications:
MBS: 28,000 lbs (12,725kg)
WLL: 5,600 lbs (5:1 ratio)
Material: Stainless Steel
Maximum Rope Diameter: 5/8" (16mm)
Length: 6-1/2" (165mm)
Width: 4.0" (100mm)
Thickness: 2.75" (70mm)
Sheave Diameter: 3" (76mm)
Weight: 2.3 lbs
View Details
|
RP130 |
Cmi Rp130 Stainless Block 5/8" |
1 |
240.95 |
/ EA |
RP130 |
|
|
Cmi Rp131 Stainless Block 3/4"
CMI RP131 3/4" Stainless Steel Block Pulley
CMI stainless steel blocks are a staple in the arborist community. Engineered to take on the most demanding rigging jobs, the block cheeks are made from high strength stainless steel to give you years of service. Aluminum alloy bushings and sheaves are supported by zinc plated steel axles. Upper bushing is easily accessed by a no-slip nob, and it is captive, so you won't loose it. Sheave is 4" in diameter and is supported by a sintered bronze bushing. Cheek plates are broad enough to protect lines during use and polished to a shine. Blocks have a work load limit (WWL) of 6,000 lbs.
Features:
Stainless steel sideplates
Aluminum sheave & bushing
Stainless steel axle
No slip knob
View Details
|
RP131 |
Cmi Rp131 Stainless Block 3/4" |
1 |
319.95 |
/ EA |
RP131 |
|
|
Micro Double Tie In Pulley
CMI RP141 Micro Mouse Pulley
Ideal for Arborist rigging where two independent tie-ins are required.
Features:
Purple anodized aluminum sideplates
1-1/4" aluminum sheave
Bushing
Aluminum axle
Specifications:
MBS: 7000 lbs
Rope Capacity: 1/2"
Size: 2.75" x 2.75"
Weight: 0.2 lbs
View Details
|
RP141 |
Micro Double Tie In Pulley |
2 |
63.99 |
/ EA |
RP141 |
|
|
Cmi Steel Rigging Block 3/4"
CMI 3/4" Steel Rigging Block
Features:
Clear zinc-plated steel sideplates
2-3/4" aluminum sheave
Bushing
Stainless steel axle
Specifications:
MBS: 25,000 lbs | 111 kN
Size: 6.5" x 4"
Rope capacity: 3/4
MPN: RP145
View Details
|
RP145 |
Cmi Steel Rigging Block 3/4" |
Please Call for Availability |
154.95 |
/ EA |
RP145 |
|
|
Isc Rope Wrench Pulley
ISC Rope Wrench Pulley
The B1ABRP281A1 has been designed with parallel side plates specifically for use with the Singing Tree Rope Wrench and the Sterling Rope tether. 1/2", 8,000 lbs.
View Details
|
RP281A1 |
Isc Rope Wrench Pulley |
2 |
39.95 |
/ EA |
RP281A1 |
|
|
Rock Exotica Orbiter Swivel Eye
ROCK EXOTICA ORBITER SWIVEL EYE
View Details
|
S3 |
Rock Exotica Orbiter Swivel Eye |
2 |
74.99 |
/ EA |
S3 |
|
|
Shembiner Chainsaw Clip
ShemBiner Chainaw Hook
The ShemBiner, now by CMI, is a high-grade, light weight, aluminum hook engineered to hold your chainsaw fast to your harness. Created by arborist, Shem Kendrick to address the ergonomic repetitive motion of the on/off to your harness... now made easier.
Features:
Invert without loosing your saw.
Light weight at 1.6 ounces.
High strength.
No gates to fiddle with.
Made in the USA.
View Details
|
SHEMBINER REG |
Shembiner Chainsaw Clip |
3 |
35.95 |
/ EA |
SHEMBINER REG |
|
